User Manual

Aach the Truck Bed
Hinges
1. Carefully turn the truck bed
upside down.
2. Orient each hinge so the hinge
tube is facing towards the center
of the truck bed and the hinge is
on the outside.
3 Align the posts on the underside
of the truck bed with the holes
on the boom of the hinge.
4. Insert the three screws into the
holes on the hinge, and ghten
the screws. Repeat
for the second hinge.
Aach the Truck Bed to
the Truck Body
5. Insert the two square, metal
tubes from the hinges into the
two square tubes located on
the back of the rear axle.
6. Push the two metal tubes into
each other unl the pins in the
axle tube insert into the holes
on the hinges.
You should hear a click sound that
conrms the square tubes are
completely connected.
Tip!
The middle screw can be
dicult to aach. It may be
easier to rst insert each
screw into the openings on the
hinge before placing the hinge
assembly on the body.
Tip!
7
2
4
5
3
1
Click
6