User manual

5
Install Dashboard Assembly
1. Place the dashboard on the
hood of the Corvette.
There are four pairs of
connectors under the
dashboard. Each connector/
cable is color-coordinated to
match a connector/cable from
the Corvette’s
floorboard.
Firmly connect each connector/
cable set as shown.
2. Lower the front dashboard
assembly onto the body of the
Corvette.
NOTE: Make sure the
connectors are not separated
and the cables are not crimped.
Slide the tabs on the dashboard
assembly into the slots in the
body
.
3. Attach the dashboard assembly
to the body (located near each
mirror slot) with 2 screws
,
using a Phillips screwdriver
.
1 1a
1b 1c
2
3