Instruction Manual

2021 - present F150 CrewCab XLT and SuperCab XLT
Page 9 of 24 AMML3J19A014AA © Copyright Ford 2021 FoMoCo
VML3Z18808A
Contact KICKER
® Technical Support at [phone] ext. 6009, or [e-mail].
first and work upward on the trim panel to
connect the other clips.
Remove the C-pillar trim panel.
1. Release the clips.
2. Release the tether clip and remove
the C-pillar trim panel.
Route wire harness down the LH side of
vehicle from ACM to C-Pillar area.
NOTE: Use supplied wire ties where
needed.
Kicker® Subwoofer Installation
NOTE: Release lever shown with seat in down
position for clarity.
Fold down the rear seat.
1. Pull release lever
2. Rotate seat back forward.
NOTE: Some vehicles may have provisions
for subwoofer brackets from the factory and
therefore do not require this step.
2
1