Instruction Manual

2021 - present F150 CrewCab XLT and SuperCab XLT
Page 8 of 24 AMML3J19A014AA © Copyright Ford 2021 FoMoCo
VML3Z18808A
Contact KICKER
® Technical Support at [phone] ext. 6009, or [e-mail].
Scuff Plate Removal – Supercab
NOTE: Removal steps in this procedure
may contain installation details.
NOTE: The seat is removed for clarity.
Release the clips and remove the scuff plate
trim panel.
C-Pillar Trim Panel Removal
NOTE: The seat is removed for clarity.
NOTE: Removal steps in this procedure
may contain installation details.
NOTE: During installation, make sure to
attach the scuff plate trim panels at the lower
B-pillar trim panel first.
Position aside the rear door weatherstrip.
Remove the bolt and position aside the
seatbelt. Torque: 30 lb.ft. (40 Nm)
Remove the retainer and the outboard
cushion side shield.
NOTE: If the tether clip is damaged during
removal, a new clip must be installed prior
to installation of the panel.
NOTE: During installation make sure to
install the clip by the scuff plate trim panel