Instruction Manual

2021 - present F150 CrewCab XLT and SuperCab XLT
Page 4 of 24 AMML3J19A014AA © Copyright Ford 2021 FoMoCo
VML3Z18808A
Contact KICKER
® Technical Support at [phone] ext. 6009, or [e-mail].
Route power wire up to cowl opening.
Secure with wire ties.
Route power wire under cowl trim panel and
out opening on opposite side.
Route power wire under bracket and secure
to sheet metal with incorporated retainer.
NOTE: Ensure hood hinge mechanism
does not interfere with power wire.
Make an incision in the rubber grommet and
route power wire into cabin.
Install the power wire connector housing on
the power wire.
1. Insert wires into connector housing.
2. Close terminal retainer cap.
1
2