Instruction Manual

4English
Specifications
ST Speakers ST7MB ST9MB ST3TW ST4TW
Woofer [in, mm] 7,18 9, 23
Tweeter [in, mm] 1, 25 1.5, 38
Peak Power Handling [ Watts] 500 600 100 100
Recommended Amplifier Power [Watts RMS] 50–250 50–300 15–50 15–50
Sensitivity [1W, 1m] 92 94 106 108
Frequency Response [Hz] 80–7.5k 80–5.5k 3.5k–20k 3k–20k
Mounting Hole Diameter [in, mm] 5-7/16,139 6-5/8, 168 4-5/8 X 6-9/16 148 X 167
Mounting Depth [in, mm] 3-3/16, 81 3-11/16, 93 3-3/8, 85
Rated Impedance [Ω] 4 or 8 4 or 8 4 4
Magnet Material Ferrite Ferrite Ferrite Ferrite
Woofer Cone Material Pressed Pulp Pressed Pulp
Woofer Surround Material Treated Cloth Treated Cloth
Tweeter Dome Material Aluminum Aluminum
Tweeter Design Bullet Bullet
Note: All specifications and performance
figures are subject to change. Please visit
www.kicker.com for the most current
information. To get the best performance
from your new KICKER speakers, we
recommend using genuine KICKER
accessories and wiring. Please allow two
weeks of break-in time for the speakers to
reach optimum performance.
Pro Tip: You’re a KICKER amplifier and a
few cables away from a full system upgrade
that will dominate any factory system!
KICKER line of amplifiers make it easy to
upgrade to solid bass with your existing
or stock source unit. Also, ask your dealer
about KICKER Subwoofer upgrades.