Owner's Manual



Fig. 18

Fig. 19

Sony Amplifier Relocation and Factory Subwoofer Removal (Sony Equipped Trucks Only)

29. Remove the retainer securing the factory amplifier connector cover and disconnect the amplifier

connectors. Fig. 14

30. Remove the two nuts and one bolt securing the factory subwoofer. Disconnect factory

subwoofer wiring and remove factory subwoofer. Fig. 15-17

31. Remove the bolt (this bolt will be re-used), factory subwoofer stud and two screws (these two

screws will be re-used) securing the factory amplifier bracket. You will also need to release the

retainers securing the factory amplifier harness to the factory amplifier bracket. Remove the

factory amplifier/bracket assembly. Fig. 18-19

Fig. 14

Fig. 15

Fig. 17

Fig. 16