Owner's Manual



21. Line up the lower subwoofer brackets and install the supplied bolts. Fig. 11 and Fig. 12

22. Reinstall all previously removed parts in reverse order.

23. Install supplied fuses into fuse holders.

24. Reconnect negative battery cable.

Input Connection for Sony® Equipped Truck

25. Remove the tape from the factory wire harness just behind the junction of the harness that

proceeds up the B pillar post between the front and rear door opening on the driver’s side of the

vehicle. Fig. 13

26. Find the twisted pair of wires that are brown/yellow stripe and white/green stripe.

Note: These wires cannot be located in the factory harness forward of the junction.

27. Install one of the supplied wire taps on each of the two wires using a pair of pliers.

28. Connect the green wire of the adaptor harness to the white/green stripe wire. Connect the

brown wire of the adaptor harness to the brown/yellow stripe wire. Fig. 13

Fig. 13

Front of vehicle

Fig. 11

Fig. 12