Owner's Manual



8. Remove the driver side front and rear threshold panel along the bottom of the door opening by

prying up.

9. Snap loose the driver’s side kick panel.

10. Connect the subwoofer harness black two-pin power connector to the power harness black two-

pin connector.

11. Connect the subwoofer harness white two pin signal input connector to the corresponding white

connector of the adaptor harness.

Input Connection Non Sony® Equipped Truck

(For trucks equipped with Sony, skip to step 25)

12. Locate the black connector and find the twisted pair of wires that are white and white/brown

stripe.

13. Install one of the supplied wire taps on each of the two wires using a pair of pliers.

14. Connect the green wire of the adaptor harness to the white wire. Connect the brown wire

of the adaptor harness to the white/brown stripe wire. Fig. 5

Fig. 5