Owner's Manual

6English
Mounting
The KPB-series mounts out-of-the-box to round
bars cylinders with the included 1.5”, 1.75”, and 2”
diameter Bar Clamps. Use the KPB Square Clamps
(LINK GOES HERE) - sold separately - to mount
your KPB to square bars. Choose a structurally
sound location to mount the KPB. The KPB may be
mounted below or above bars, and the Mounting
Base may be rotated ±30° to accommodate some
curved bars. Make sure there are no items interfering
with the route of the wiring.
Installation tools are not provided. 5mm and 6mm
Allen Wrenches are required.
1. Screw the Mounting Bases to the PowerBar using
the Mounting Screws.
±30°
6mm Allen Wrench required