Operation Manual

7
KX Amplifiers
SOURCE UNIT
Left +
Left -
Right -
Right +
Speaker
Outputs
RCA
Outputs
WARNING - Use either the Hi-Level or RCA Inputs. Never Both !!
To Next Amplifier or Processor
USING THE SIGNAL OUTPUT JACKS (PAST)
The Output (Pre Amp Signal Transfer) RCA jacks allow you to
send the incoming signal from one Kicker KX series amplifier to
another amplifier or processor without the need for Y cables. The
signal from the PAST jacks is identical to the signal fed to the
amplifier via its RCA input jacks or the High Level inputs and is
not affected by the amplifier’s built in crossover.
Most head units with high voltage outputs should be
capable of driving up to ten amplifiers in a chain.
Installation
System Diagrams