Owner's Manual
OPERATION
Audio Settings
Audio Menu:
Press the knob for 2 seconds from any source screen
to
enter the Audio Settings Menu. Rotating the knob left and right will
scroll between the available settings. Pressing the knob will select high-
lighted setting.
Bass: Rotate the knob left and right
to
adjust the Bass. Pressing enter
will confirm setting. Adjustment
is
from -6
to
+6.
Mid: Rotate the knob left and right to adjust the Midrange. Pressing
enter will confirm setting. Adjustment is from -6
to
+6.
Treble: Rotate the knob left and right
to
adjust the Treble. Pressing
enter will confirm setting. Adjustment
is
from -6
to
+6.
Balance: Rotate the knob left and right to adjust the Balance. Pressing
enter will confirm setting. Adjustment
is
from Left 1 0
to
Right 1
0.
Fader: Rotate the knob left and right
to
adjust the Fader. Pressing enter
will confirm setting. Adjustment
is
from Front 10 to Rear 10.
Sub: Rotate the knob left and right
to
adjust the Subwoofer level.
Pressing enter will confirm setting. Adjustment is from 0
to
+ 1
0.
Equalizer: When the
EO
is
ON, Bass, Mid & Treble controls are not ac-
cessible. The KMC20 has the following preset options for the
EO:
OFF-
ROCK-
POP-
VOCAL-
JAZZ-
HIP-HOP-
CUSTOM. Rotating
the knob left and right
to
scroll between the options and press enter to
select.
To
enable Bass, Mid & Treble controls,
EO
must be set
to
OFF.
When using the
CUSTOM
EQ you can adjust the following frequencies:
64Hz - 250Hz - 1 K - 4K - 16K
In
each
of
these frequencies you can adjust the values from -6 to
6.
9