Owner's Manual

2
The KICKER KM coaxial speakers are specifi cally designed for mounting in free-air applications. The
speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound
coming off the front of the driver from the sound radiating from the back of the driver. This isolation is
usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated
rear chamber.
SPECIFICATIONS
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
LOCATION
The sound produced by the KM coaxials is directional. Find the best location for stereophonic sound. If
necessary, add more KM coaxial speakers to the system to help distribute and balance the sound-stage.
After determining the best mounting locations, carefully check the areas where the mounting hardware will
be placed.
Model: KM60
Woofer [in, mm] 6-1/2, 160
Tweeter [in,mm] 1/2, 13
Rated Impedance [Ω] 4
Peak Power Handling [ Watts] 150
Continuous Power Handling [Watts RMS] 50
Sensitivity [1W, 1m] 90
Frequency Response [Hz] 35-21k
Mounting Hole Diameter [in, mm] 5-3/16, 132
Mounting Depth [in, mm] 2-1/2, 62
Grilles Yes
Tweeter Magnet Material Neodymium
Tweeter Dome Material PEI
Tweeter Design Balanced Dome
Woofer Cone Material Polypropylene
Woofer Surround Material Santoprene
KM Coaxial Speakers
Owner’s Manual
2014 KM604W Coax Rev B.indd 22014 KM604W Coax Rev B.indd 2 11/7/2013 3:48:03 PM11/7/2013 3:48:03 PM