Owner's Manual

iK150 DIGITAL STEREO SYSTEM with ALARM

USING THE ALARMS

• Tap the alarm1 or alarm2 button to turn each alarm on and off.

• Use the quickstart on page 5 for instructions on how to set an alarm.

• You can set the alarm source to DOCK, FM1, FM2, AM, or buzzer.

• When an alarm goes off, hit the SNOOZE button to silence the alarm for 9 minutes.

USING THE RADIO

To improve FM/AM radio reception, connect the included FM antenna to the coaxial jack on the rear of the

iK150 and/or the included AM Loop antenna to the AM terminals on the rear of the iK150. You may need

to experiment with antenna angle/position for optimal reception.

• Source to FM1, FM2, or AM (see page 5 for instructions).

• Tap the navigation knob to display radio station; rotate the knob to adjust radio frequency.

• Use the and buttons to seek to the next strongest station.

• Store the current station in memory by holding any of the m1–m4 buttons.

• Recall a stored station by tapping the m1–m4 memory button to which it is assigned.

• Tap the SNOOZE button to mute/unmute.

Setting the Radio Region

1. Press setup then source within one second.

2. Rotate the navigation knob to select between Region 1 and 2.

3. Press the navigation knob to save.

Region 1: All countries except North America and the Caribbean

Region 2: North America (USA & Canada) and the Caribbean

USING YOUR iPod WITH THE iK150

• Insert your iPod into the iK150 dock before turning on the iK150.

• Turn off the iPod’s SoundCheck option for optimal sound quality.

• The use of a dock adapter plate with your iPod is not required. Installing an adapter plate

along with the included isolation bracket will provide a more secure ﬁ t for your iPod,

reducing vibration.

• Third Gen and older iPods work by connecting their headphone output to the auxiliary

input on the rear of the iK150.

• Tap the SNOOZE button to mute/unmute.

2009 iK150 Multilingual i01.indd 62009 iK150 Multilingual i01.indd 6 6/23/2009 11:44:17 AM6/23/2009 11:44:17 AM