Owner's Manual

IMPORTANT
Thank you for purchasing a Klock Werks®
Fit
Kit equipped with industry leading
KICKER®
speakers and
arilplifier.
There are two models
of
amplifier that may be used
in
this
kit:
PX1
00.2
or
PM200.2.
Set the switches to the following
configuration for the
PX1
00.2
IMPORTANT:
Turn
the gain
all
the way down,
then increase to
20%,
about 1
I
4 turn from
0.
Product ships with gain at maximum setting.
Set
the switches to the
following
co.nflguration for the
PXA200.2
Your
gain
rotary
should look
like
this.
Be careful not
to
set it
to
80%
instead
I
GAIN
All
other installation procedures, including wiring and mounting, are the same for either amplifier.
Enjoy your Performance PowerSports equipment as engineered
by
Klock Werks and KICKER!
KvVSS-082415-C