Owner's Manual

2. Remove factory speakers.
Remove the factory speaker connectors.
Retain the 3 factory screws.
Remove the factory speakers from the factory angle mount (be careful not to damage the angle mount).
[viewed from front of bike]
factory speaker connectors
3. Prepare PS5250 for installation.
Install the KICKER badges onto the grilles; bend the rear posts to secu re them in place.
For Harley "batwing" installations, replace the factory grilles with
KICKER grilles.
factory screws x 3
KICKER PS525~ l
For all other Harley applications, use the factory grilles only.
recommended
badge location
KICKER grille
factory grille
(remove for "batwing" only)
4. Install PS5250 in factory location.
Use the 3 factory screws.
Connect the factory speaker connectors to the PS5250 terminals.
Re-install your bike's front fairing
in the reverse order you disassembled it.
install short screw at
bottom
3