KICKER AMP & SPEAKER INSTALLATION GUIDE I FOR USE WITH HARLEY DAVIDSON 1996-2013 FLHT I INCLUDED IN THIS FIT KIT: ~ Step-by-step Installation Guide 5 1/4" Kicker Speakers Pair ~Kicker Amp 100W/50W ~ Stainless Steel Mounting Bracket ~ Custom Wiring Harness ~ ~ All Necessary Hardware - 8 - 32 x 1/2" Button Head Bolts - 8- 32 Nylock Nuts - Black Heat Shrink - Black Cable Tie
. KLOCK WERKS I FLHT KICKER AMP AND SPEAKER INSTALLATION GETTING STARTED *Please refer to model appropriate service manual for procedures and torque specifications 1. Protect all painted surfaces and passing lamps, if equipped, with a soft cloth 2. Remove seat and disconnect negative battery terminal (Picture 1) a. On 2009 and later models it will help to remove the two T40 bolts and the ECM and tray (Picture 2) 3. Remove windshield and outer fairing a. Remove the three windshield fasteners (Picture 3) b.
KLOCK WERKS I FLHT KICKER AMP AND SPEAKER INSTALLATION (CONTINUED) WIRE ROUTING 1. 2. 3. - 4. 5. a. Take the electrical harness and plug it into the amplifier Following the color code, route the left and right side speaker wires safely to their respective speakers (Pic 1) Plug in the male ends into the stock harness, the terminals removed during speaker installation (Pic 1) Plug the female ends onto the speaker terminals (Pic 1) Locate the headlamp harness and remove the red cap over the Orange/White wire.
IMPORTANT Thank you for purchasing a Klock Werks® Fit Kit equipped with industry leading KICKER® speakers and arilplifier. There are two models of amplifier that may be used in this kit: PX1 00.2 or PM200.2. Set the switches to the following configuration for the PX1 00.2 Set the switches to the following co.nflguration for the PXA200.2 GAIN IMPORTANT: Turn the gain all the way down, then increase to 20%, about 1I 4 turn from 0. Your gain rotary should look like this.
PXA Amplifiers PXA STEREO AMPLIFIER PXA200.2 Owner’s Manual | English Manual del Propietario | Español AMPLIFICADOR DEL LA SERIE PXA.2 Benutzerhandbuch | Deutsch MONOVERSTÄRKER DER PXA.2-SERIE Manuel d’utilisation | Française AMPLIFICATEUR DE SÉRIE PXA.
PXA.2-SERIES AMPLIFIERS OWNER’S MANUAL MODEL: PXA200.2 Authorized KICKER Dealer: Purchase Date: Serial Number: IMPORTANT SAFETY WARNING – PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER IN A DISTORTED OR CLIPPED MANNER CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS AND/OR VEHICLE. PERFORMANCE Model: PXA200.2 RMS Power [Watts] @ 14.4V, 4Ω stereo, ≤ 1% THD+N @ 14.4V, 2Ω stereo, ≤ 1% THD+N @ 14.
KICKER KISL (optional) Model External Fuse PXA200.2 1 x 15 Ampere to amplifier from source unit high-level speaker outputs Cut the looped red power cable located on the PXA harness and install a 15A fuse. Fuse installation should be within 18” (45cm) of the battery and in-line with the harness’ power cable, which is connected to your amplifier.
OPERATION INPUT LEVEL AUTO TURN-ON HI-PASS FILTER 60Hz 80Hz 120Hz OFF LO 12V HI DC Automatic Turn-On Selection: The PXA series offers two automatic turn-on modes that can be selected on the end panel; +12V or DC Offset. Using the DC Offset mode causes the REM terminal wire to have +12V out for turning on additional amplifiers. • Remote Turn-On: Set the switch to +12V to use the remote turn-on lead from the PXA harness.
TROUBLESHOOTING If your amplifier does not appear to be working, check the obvious things first such as blown fuses, poor or incorrect wiring connections, incorrect setting of crossover switch and gain controls, etc. There is a Power Protection LED on the side power panel of your Kicker PXA series amplifier. Depending on the state of the amplifier and the vehicle’s charging system, the LED will glow either Red or Blue. When the blue LED is lit this indicates the amplifier is turned on and no trouble exists.
ELECTRONICS LIMITED WARRANTY When purchased from an Authorized KICKER Dealer, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase. If this product is identified as “Refurbished” or “B Goods”, the warranty is limited to a period of THREE (3) MONTHS from date of original purchase. In all cases you must have the original receipt.
INTERNATIONAL WARRANTY Contact your International KICKER dealer or distributor concerning specific procedures for your country’s warranty policies. WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level.
©2014 Stillwater Designs®
PS5250 COAXIAL SPEAKERS Owner's Manual lfKICKER Authorized KICKER Dealer: Purchase Date: PERFORMANCE Woofer Size 5-1/4" [133mm] Tweeter Size 3/4" [20mm] Frequency Response 60Hz-20kHz Max Amplifier Power 1 Sensitivity [1 W/1 m] 88.3dB Nominal Impedance 20 Weight 12.
2. Remove factory speakers. Remove the factory speaker connectors. Retain the 3 factory screws. Remove the factory speakers from the factory angle mount (be careful not to damage the angle mount). [viewed from front of bike] factory speaker connectors 3. Prepare PS5250 for installation. Install the KICKER badges onto the grilles; bend the rear posts to secure them in place. For Harley "batwing" installations, replace the factory grilles with KICKER grilles.
ACOUSTICS LIMITED WARRANTY KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the original receipt.
INTERNATIONAL WARRANTY Contact your International KICKER dealer or distributor concerning specific procedures for your country's warranty policies. WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level.
.ft.{fKICKER{fKJCKER(fKJCKER{fKICKERlfKICKERlfK/CKERlfKICKER{fKICKER{fK/CKER{fKICKER{fK/CKER{fKICKER..,. ~ ~ t) ~ Ci. ~ A: ·~ ~ y 5( ~ ft JQ ~ U 52 ~ It ~ ~ U S( ~ ~4f It ~ ~ U ~ m ~ U ~ ~ ,_ r;t ~ ~ $::! ~ ~ . LIMITED WARRANTY .
