Owner's Manual

EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Configuration Guide
Page 7 of 9
STUD MOUNTING
Similar to Bolt-to-Mounting, Stud Mounting allows for the mounting system and speaker
to be pre-assembled and then bolted to a surface. The mounting bolts are retained inside the
mount creating studs to secure the enclosure to the desired surface. Nuts are threaded onto the
studs securing the enclosure in place.
1. Place the supplied four 1½” long 5/16”-18UNC hex head bolts through the mount.
2. Apply the supplied anti-seize to the 7/8” long 5/16”-18UNC socket head bolts included
with the enclosures.
3. Place the mount with nuts in it onto the enclosure and secure using the four supplied 7/8”
long 5/16”-18UNC socket head bolts.