Owner's Manual

EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Configuration Guide
Page 6 of 9
5. Apply Loctite Threadlocker 271 (red) to the threads of the supplied 1½” long 5/16”-
18UNC hex head bolts.
6. Plug the electrical connector into the speaker enclosure.
7. Hold enclosure up to the desired surface and thread 1½” long 5/16”-18UNC hex head
bolts through surface and into 5/16”-18UNC hex nuts. Torque bolts to 10 ft-lbs.