Owner's Manual
EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Configuration Guide
Page 5 of 9
BOLT-TO-MOUNTING
Bolt-to-mounting allows for the mounting system and speaker to be pre-assembled and
then bolted to a surface. Unlike bolt-thru-mounting, nuts are secured within the mount and the
mount is assembled onto the enclosure. The bolts are routed through the mounting surface and
then the bolts thread into the mount.
1. Place the supplied four 5/16”-18UNC hex nuts into the mount.
2. Apply the supplied anti-seize to the 7/8” long 5/16”-18UNC socket head bolts included
with the enclosures.
3. Place the mount, with 5/16”-18UNC hex nuts in it, onto the enclosure and secure using
the four supplied 7/8” long 5/16”-18UNC socket head bolts.
4. Torque 7/8” long 5/16”-18UNC socket head bolts to 10 ft-lbs.