User Manual

J. Use three (3) M6 screws & washers to hand tighten the

enclosure from behind the  rewall. Once all M6 screws have

been hand tightened, go back and tighten all screws with T30

torx driver.

H. Place enclosure in location for mounting.

K. Route the speaker wire away from any moving parts and sharp

metal, then connect to the ampli er.

G. Using a ¼ drill bit, drill holes for mounting of the enclosure.

I. Line up the holes from the enclosure to the mounting plate and

use three (3) M6 screws and washers to mount the enclosure.

Once all M6 screws have been hand tightened, go back and

tighten all screws with T30 torx driver.