KMTC Loaded Marine Cans Owner’s Manual KMTC65 | KMTDC65 KMTC8 Manual del Propietario | Español Gabinete de torre KICKER MARINE Benutzerhandbuch | Deutsch KICKER MARINE Can-Gehäuse Manuel d’utilisation | Française Boîtiers pour haut-parleurs verticaux KICKER MARINE
KICKER LOADED MARINE CANS Owner’s Manual MODEL: KMTC65 | KMTDC65 | KMTC8 Authorized KICKER Dealer: Purchase Date: Serial Number: The KICKER KMTC Loaded Marine Cans are the perfect way to bring your music out into the marine or power sports environment. The KMTC65 and KMTC8 come loaded with the KICKER KM65 and KM8 LED speakers. The injection-molded ABS enclosures are UV treated, splash resistant, and weather resilient.
Step 2: Thread the speaker and LED wires through the bottom of the lower mounting bracket and out of the plastic liner hole in the center. lower mounting bracket swivel base IMPORTANT: You must apply a thin layer of the included anti-seize compound to ALL threaded fasteners before installation. Step 3: The mounting hardware design provides versatility in angular positioning to direct the speaker’s output to the ideal listening position using the quick adjust swivel lever.
Step 4: Partially install the swivel lever, adjusting it to be loose (open) when the lever is parallel to the tube, then finish tightly securing the swivel lever to the enclosure using the included thumbscrew. When the swivel lever is locked in place, or closed, the bracket rotation assembly will be clamped tight. swivel lever thumbscrew 3 1 swivel lever 2 Step 5: Extend the speaker and LED wiring through the hole you have drilled and connect them to your source unit or amplifier.
2A fuse (max) ≤7” (17.5cm) +12V } 12V Ground battery Step 6: Secure the enclosure to the tower tube with the upper and lower mounting brackets. With the wiring clearance hole you drilled and the wiring shroud on the lower mounting bracket lined up, position the enclosure assembly so that it is tightly against the tower tube. Once in position, install the upper mounting bracket using the included stainless steel socket-head cap screws.
ACOUSTICS LIMITED WARRANTY When purchased from an Authorized KICKER Dealer, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEAR from date of original purchase. If this product is identified as “Refurbished” or “B Goods”, the warranty is limited to a period of THREE (3) MONTHS from date of original purchase. In all cases you must have the original receipt.
INTERNATIONAL WARRANTY Contact your International KICKER dealer or distributor concerning specific procedures for your country’s warranty policies. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
©2017 Stillwater Designs
