Owner's Manual

Wiring:
Attach the wiring from your
amplifier
to the outer speaker
terminals.
Attach the
included internal
wiring
from the
KMTES to your speaker, and then mount the speaker to the
enclosure.
If
you are using a speaker or
grille
equipped with
LED
wiring,
run
this wire through the
LED
wire port
located
underneath the outer speaker
terminals and then through the
LED
wire grommet.
LED wire
grommet-
Use
to form a seal
around the
LED
wiring and
hole,
preventing
moisture from entering the
enclosure.
4
LED
wire port
LED wire
plug -
Use to
seal
the
LED
wire
hole located
below
the speaker
terminals
when LED-equipped
speakers are not
in
use.
LED
wire port