Owner's Manual

2
QSS COMPONENT SYSTEM
Owner’s Manual
The KICKER QSS-series component systems offer unmatched audio fi delity for vehicle applications. Whether you’re
confi guring the ultimate multi-speaker and subwoofer surround system or simply upgrading from dull, lifeless factory
speakers, the QSS component systems deliver the most pleasing full-range sound on the market today! Key features of
our highest-end component systems include:
Authorized KICKER Dealer:
Purchase Date:
Speaker Serial Number:
Model QSS65 QSS67
Woofer [in, mm] 6-1/2, 160 6-3/4, 165
Tweeter [in,mm] 1-3/16, 30 1-3/16, 30
Dome Material Tetoron® Tetoron®
Rated Impedance [Ω] 4 4
Peak Power Handling [ Watts] 180 200
Continuous Power Handling [Watts RMS] 90 100
Sensitivity [1W, 1m] 86dB 87dB
Frequency Response [Hz] 50–22k 40–22k
Woofer Mounting Hole Diameter [in, mm] 5-1/16, 129 5-7/16, 138
Woofer Bottom Mount Depth [in, mm] 2.5, 63.5 2.5, 63.5
Flush Mount Tweeter Hole Diameter [in,mm] 1-13/16, 46 1-13/16, 46
Flush Mount Tweeter Depth [in,mm] 1-1/8, 29 1-1/8, 29
High Pass [dB], at Frequency [Hz] 24, 2800 24, 2800
Low Pass [dB], at Frequency [Hz] 12, 2800 12, 2800
High Frequency Output Attenuation [dB] 0, +3, +6 0, +3, +6
MODELS: QSS65 / QSS67
Crossover Woofer Tweeter
Zobel Impedance correction to fl atten
impedance network
Revolutionary surround design maximizes
cone area, maintains standard cutout size
Pressed polyfi l inserted behind the
dome for acoustic dampening
Mylar capacitors and audiophile-grade air core
inductors
Copper shorting ring on the pole piece to
reduce distortion
Dual Neodymium magnets with
tuning vent
Bi-amplifi cation capable Polished back plate Dupont Tetoron composite dome
Asymmetrical circuit design Tri-tech cone design Open wire mesh-grill
Brushed aluminum base heat sink Aluminum phase plug Sealed and tuned chamber
Balanced tweeter attenuation Copper-clad aluminum coil wire Copper-clad aluminum coil wire
Heatsinked resistors for increased power-
handling
Ultra-durable Spiral Tinsel leads, woven
through the duo-wave spider
Acoustic cavity coupled to magnet
reduces internal refl ections
Dedicated attenuation jumpers (0, +3 or +6
dB) for a clean connection with less resistance
Strongest available cast aluminum basket,
increasing magnetism
Enclosure volume allows for
lower frequencies, better off-axis
response
Illuminated tweeter protection Nickel-plated, spring-loaded terminals Extended Tweeter post
PERFORMANCE
2014 QSS Multilingual Rev C.indd 22014 QSS Multilingual Rev C.indd 2 9/24/2013 2:31:57 PM9/24/2013 2:31:57 PM