Owner's Manual

5
Fuses
PT8: 7.5 Amperes
PT10: 7.5 Amperes
PH12: 7.5 Amperes
PHD12: 15 Amperes
Automatic Turn-On Selection: KICKER powered enclosures offer two different automatic turn-on modes that
can be selected on the side panel; +12V and DC Offset. Using the DC Offset mode causes the REM terminal to
have +12V out for turning on additional amplifi ers.
• Remote Turn-On: Set the switch to +12V to use the remote turn-on lead from your source unit. Run 18
gauge wire from the Remote Turn-On Lead on your source unit to the terminal labeled REM on the quick-
connect power harness. This is the preferred automatic turn-on method.
• DC Offset Turn-On: If Remote Turn-On is not an option, the next best setting is DC Offset. The DC Offset
mode detects a DC offset from the HI-Level speaker outputs when the source unit has been turned on.
L R GND REM +12V
+12V DC
LOHI
180
0
0
0
6
120
2011 PH-PT RevI.indd 52011 PH-PT RevI.indd 5 1/11/2011 9:18:19 AM1/11/2011 9:18:19 AM