Owner's Manual
3
Model:
DS35 DS40 DS46 DS525 DS60 DS65 DS68 DS693
Speaker Design 2 - Way 2 - Way 2 - Way 2 - Way 2 - Way 2 - Way 2 - Way 3 - Way
Woofer Size, in (mm) 3 1/2 (89) 4 (100) 4x6 (100x160) 5 1/4 (130) 6 (160) 6 1/2 (165) 6x8 (160x200) 6x9 (160x230)
Mid Size, in (mm) - - - - - - - 2 (50)
Tweeter Size, in (mm) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13)
Rated Impedance, ohm (DC Resistance, ohm) 4 (3.2) 4 (3.5) 4 (3.3) 4 (3.4) 4 (3.3) 4 (3.3) 4 (3.5) 4 (3.5)
Power Range, Watts RMS 6-15 6-25 6-25 6-35 6-50 6-50 6-35 6-70
Peak Power Handling, Watts 30 50 50 70 100 100 70 140
Sensitivity [SPLo], dB @ 1W, 1m 88 88 88 90 90 90 90 92
Effective Frequency Range, Hz 80-20k 60-20k 50-20k 45-20k 43-20k 40-20k 45-20k 30-20k
Mounting Hole Diameter, in (mm) 3 1/16 (78) 3 3/4 (95) 4x6 (101x152) 4 1/2 (115) 4 13/16 (123) 5 1/2 (140) 5x7 3/16
(127x183)
5 15/16x8 3/4
(151x222)
Top Mount Depth, in (mm) .48 (12.2) .4 (10.2) .34 (8.7) .46 (11.6) .56 (14.2) .38 (9.7) .47 (12) .98 (24.8)
Bottom Mount Depth, in (mm) 1 3/4 (44) 1 3/16 (46) 1 7/8 (48) 1 7/8 (48) 1 7/8 (48) 1 3/16 (46) 2 3/8 (60) 3 1/4 (83)
Tweeter Protrusion, in (mm) .23 (5.9) .25 (6.3) .24 (6.1) .2 (5.2) .23 (5.9) .2 (5) .08 (2) .46 (11.8)
Grilles No Yes No Yes Yes Yes No Yes
Tweeter Magnet Material Neodymium Neodymium Neodymium Neodymium Neodymium Neodymium Neodymium Neodymium
Tweeter Dome Material PEI (polyether
imide)
PEI (polyether
imide)
PEI (polyether
imide)
PEI (polyether
imide)
PEI (polyether
imide)
PEI (polyether
imide)
PEI (polyether
imide)
PEI (polyether
imide)
Tweeter Design Balanced dome Balanced dome Balanced dome Balanced dome Balanced dome Balanced dome Balanced dome Balanced dome
Woofer Cone Material Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene
Woofer Surround Material Polyester foam Polyester foam Polyester foam Polyester foam Polyester foam Polyester foam Polyester foam Polyester foam
PERFORMANCE
2011 DS Coax Multilingual h01.indd 32011 DS Coax Multilingual h01.indd 3 7/14/2010 2:56:01 PM7/14/2010 2:56:01 PM