Owner's Manual

5
WIRING
We recommend using 16 gauge (or larger) wire. The RS components are rated at 4 ohms and work with
any source unit or amplifi er designed to operate at a 4 ohm load. Make sure your source unit or
amplifi er is rated for 4 ohm operation.
Crossover in 2-way confi guration | One component set per channel
At least two amplifi er channels are needed for stereo operation (only one channel is shown)•
- IN +
OUT
-MID+
OUT
-TW+
-OUT+
+
-
+
-
+
-
+
-
+
-
+
-
- OUT +
- IN +
OUT
-MID+
OUT
-TW+
- IN +
OUT
-MID+
OUT
-TW+
Crossover in 2-way confi guration | Two component sets per channel
Requires two complete RS systems (four woofers, four tweeters, four crossovers)•
At least two amplifi er channels are needed for stereo operation (only one channel is shown)•
Crossovers wired in series•
tweeter
crossover
woofer
source unit / amplifi er
source unit / amplifi er
2009 RS Multilingual f01.indd 52009 RS Multilingual f01.indd 5 11/21/2008 10:57:28 AM11/21/2008 10:57:28 AM