Owner's Manual

6
KX Amplifiers
Installation
System Diagram
The following diagrams show the most common
configurations for your Kicker KX.1 series amplifier.
ONE CHANNEL OPERATION
KX.1 series amplifiers are capable of operating into a
minimum impedance of 2 ohm for the KX400.1, KX600.1 and 1
ohm for the KX1200.1.
SIGNAL INSIGNAL OUT
+
-
+
_
+12V
GROUND
REMOTE
TURN-ON
BATTERY
FUSE
18"
or less
STRAPPING TWO KX.1 AMPS(DOUBLE POWER)
By using a Mono plug (available at Radio Shack) you can run
two KX.1 amplifiers into one woofer. Minimum impedance 4
ohm for KX400.1, KX600.1 and 2 ohm for the KX1200.1.
When strapped the Secondary amplifier controls are
bypassed. See Tech. Brief for more info. on this
configuration.
+12V
GROUND
REMOTE
TURN-ON
BATTERY
FUSE
18"
or less
+12V
GROUND
REMOTE
TURN-ON
BATTERY
FUSE
18"
or less
-
SIGNAL IN
+
+
_
+
-
OUT IN
AMP STRAPPING
3.5mm/ 1/8" Tip sleeve
Mono 2 conductor