Owner's Manual

{fKICKER.
Authorized KICKER Dealer:
CXRC
REMOTE
BASS CONTROL
Owner's
Manual
------------------------------------------------------------
Purchase
Date:
CXRC
INSTALLATION
CXAmplifier
Remote
cable
passes audio;
do
not run
cable parallel
to
po
wer
wires.
CXRC
back view
Surface-mount the
CXRC
remote
using the supplied
screws.
Connect the supplied
1/8th
inch [3.5mm] patch
cable
to
the
CXRC
remote and the Remote Bass
jack on the
amplifier
The
CXRC
is compatible with any
KICKER CX amplifier equipped with a
REMOTE
BASS
jack
on its end panel.
With the
CXRC
remote bass
level control, you have the
ability
to
control
the output
level
of
the
amplifier remote
ly.
To
surface-mount the
CXRC
remote bass
level control, simply
screw the remote
to
the chosen
location,
then run the
cable
from the controller
to
the "Remote
Bass" jack on the
amplifier panel.
Do
NOT
connecVdisconnect
while the amplifier
is
on. Connecting the
3.5mm
cable
without the remote
will
cause the
amplifier
to
output at
full gain, possibly
damaging your
speakers.