Owner's Manual

2. Remove factory speakers.
Remove the factory speaker connectors.
Reta1n
the 3 factory screws.
Remove the factory speakers from the factory
angle
mount (be
careful
not
to
damage the
angle
mount).
[ viewed from front
of
bike ]
factory speaker connectors
3. Prepare
PS5250
for installa
ti
on.
Install
the KICKER
badges onto the
grilles; bend the rear posts to secure them in place.
For
Harley "batwing"
installations,
replace
the factory
grilles
w1th
KICKER grilles.
factory screws x
3
~CKER
PS525~
~
For
all
other
Harley applications, use the factory
grilles
only.
recommended
badge
locat1on
KICKER grille
factory
grille
(remove for "batwing" only)
4.
Install PS5250
in factory location.
Use the 3 factory screws.
Connect the factory speaker connectors
to
the PS5250
term1nals.
Re-nstall
your
b1ke's
front fairing
in
the reverse order you
disassembled
1t.
install
short screw at
bottom
3