Specification Sheet

8T Tape Light and Connector Accessories
8T
© 2019 Kichler Lighting LLC. All Rights Reserved. | LS19008
PROJECT: PRODUCT #:
TYPE: DATE:
PREPARED BY: AUTHORIZED BY*:
COMMENTS:
SPECIFICATIONS
ELECTRICAL
Input Voltage 24VDC
Input Current 4A (Max)
Power See Data Table
Connector Patent Pending and Polarity Independent 8T Connector
PHOTOMETRICS
Light Source 2835 LED
LEDs per Foot 18
Color Temperature(s) 2200K/2700K/3000K/4000K/5000K
Color Rendering Index (CRI) 90 (Min), R9>50
Dimmable Yes (With Compatible Low Voltage 24V Power Supplies)
Lumen Packages See Data Table
RATINGS & CERTIFICATIONS
Location Rating Dry
Operating Ambient Temperature 0°C – 50°C
Storage Ambient Temperature -30°C – 85°C
Lumen Maintenance L70 at >50,000 Hrs calculated per TM-21/LM-80
Safety Certification cULus Listed, Class 2
Standard Output rated for closet use, U.S. only
MECHANICAL
Length See ordering information table
Cut Length 4 inches on marked lines
Max Run Length See Data Table
Width 10mm
Height 3.1mm (Tape with connector base; connector accessory will add height)
MOUNTING
Adhesive: 3M™ VHB
OPTICS
Beam Angle: 115° Avg.
WARRANTY
5yr 24/7 Operation
ACCESSORIES
See 8T Connector Accessories
OVERVIEW
The 8T Series of Commercial Grade LED Tape Light is designed to
integrate with our patent-pending connector accessory system to
simplify and speed up the installation of even the most complicated
tape light design configurations. The tape features a flexible 2-layer
circuit board that supports increased run lengths with less voltage drop.
It then offers a push-in connector base every four inches with cut marks
to either side. Eight unique connector accessories can install straight
on (0-degrees) or rotated (180-degrees) – regardless of tape direction
or polarity – and simply push into place.
FEATURES
• Available in Standard, High, and Ultra High output in 5 color
temperatures: 2200K, 2700K, 3000K, 4000K, and 5000K
• An assortment of strips and rolls, ranging from 4" to 100'
• Compatible with 8 unique connector accessories that can decrease
installation time in any design configuration
• Flexible 2-layer circuit board for extended run length: 67' Standard, 33'
High, 10' Ultra High
• Field-cuttable on marked cut lines on either side of the connector
• Edge-to-edge 3M
™
adhesive
*A Kichler Lighting representative
can assist with a proposed Spec