Installation Sheet

Wire
Connector
Short
Machine
Screw
Qty: 3
Qty: 2
Canopy
Screw
Qty: 3
3
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
• IMPORTANT: NEVER attempt any work without shutting o the electricity.
• Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in
the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es),
that control the power to the fixture or room that you are working on.
• Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or
pull chain, place those in the "OFF" position.
• Do not touch hot LED.
• The LED light output is strong enough to injure human eyes. Precautions must be taken to
prevent looking directly at the LEDs with unaided eyes for more than a few seconds.
• California Proposition 65
WARNING: This product can expose you to lead, which is known to the State of
California to cause cancer, birth defects or other reproductive harm. For more
information go to www.p65warnings.ca.gov
CAUTION
• Read and understand all instructions and illustrations completely before proceeding with
assembly and installation of this fixture.
• If you have any doubts about how to install this lighting fixture, or if the fixture fails to
operate completely, please contact a qualified licensed electrical contractor.
• All parts must be used as indicated in these instructions. Do not substitute any parts, leave
parts out, or use any parts that are worn out or broken. Failure to obey this instruction
could invalidate the UL listing, C.S.A. certification, and/or ETL listing of this fixture.
• This fixture is intended for installation in accordance with the National Electric Code (NEC)
and all local code specifications.
• This fixture is for indoor use only.
• Use ONLY the supplied LED driver to power fixture.
• Driver cable is not intended for use through or concealed behind walls, floors, or ceilings.
• This fixture is dimmable when using an electronic low voltage (ELV) dimmer. Note: dimmers
that specify use with LED, but are not ELV, are NOT sucient. They are designed to work
with LED “bulbs” not integrated LED fixtures.
HARDWARE CONTENTS
SAFETY INFORMATION
AA
BB
CC