Installation Guide

PACKAGE CONTENTS

This fixture comes preassembled. The following steps are for replacing the bulb.

Diffuser Ring

Diffuser

Diffuser Screw

PART DESCRIPTION QTY.

Bulb

Socket Assembly

Quick Connect

PART DESCRIPTION QTY.

• TURN OFF POWER. Connect fixture’s 12V

cable to transformer landscape wire run using

supplied wire connector.

•

Make wire connections using supplied

Quick connect following instructions below,

or using other approved wiring connection

method (not supplied.)

Remove the diffuser screws (C)

to release the diffuser ring (A)

and diffuser (B).

Lower the diffuser (D) and

diffuser ring (A) and secure with

diffuser screws (C).

4. Determine desired location for this ﬁxture.

Remove and replace bulb (D)

using a 5-watt. MR16 Bulb.