Specification Sheet

22 Kichler
®
Lighting
AVAILABLE FINISHES
Bronze (BRZ), Nickel (NI) and White (WH)
1
SELECT
APPROPRIATE
LIGHT FIXTURE
SIZE & FINISH
STEP
Starter Kit
10568 BRZ, NI, WH
n 1 light, 14" Interconnect
Cable and Wire Module
n 12 Volt, 18 Watt Xenon bulb included
n 7" L x 5" W x 1" H
10567 BRZ, NI, WH
n 2 light, 14" Interconnect
Cable and Wire Module
n 12 Volt, 18 Watt Xenon bulbs included
n 13" L x 5" W x 1" H
10566 BRZ, NI, WH
n 3 light, 21" Interconnect
Cable and Wire Module
n 12 Volt, 18 Watt Xenon bulbs included
n 22" L x 5" W x 1" H
10585 BRZ, NI, WH
n 4 light, 21" Interconnect
Cable and Wire Module
n 12 Volt, 18 Watt Xenon bulbs included
n 30-1/2" L x 5" W x 1" H
Modular (Fixture Only) Xenon
10565 BRZ, NI, WH
n 1 light, 7" L x 5" W x 1" H
n 12 Volt, 18 Watt Xenon bulb included
10564 BRZ, NI, WH
n 2 light, 13" L x 5" W x 1" H
n 12 Volt, 18 Watt Xenon bulbs included
10563 BRZ, NI, WH
n 3 light, 22" L x 5" W x 1" H
n 12 Volt, 18 Watt Xenon bulbs included
10587 BRZ, NI, WH
n 4 light, 30-1/2" L x 5" W x 1" H
n 12 Volt, 18 Watt Xenon bulbs included
Modular Accessories
10570* BK, WH – Wire Module
n 7-3/4" L x 2-5/8" W x 1" H
n Provides for safe, push-in wiring without
the use of wire connectors
n Interconnect cables easily join wire
module and fixtures
n Integrated supply wire strain relief for
one or two wires
n Snap-on cover
n Use for hard-wire installation
n Use with sheathed cable
(12-2 or 14-2 with ground)
A
A
10563 BRZ
Fixture
shown in Bronze
30-1/2"
22"
13"
7"
7"
13"
30-1/2"
22"
10570 BK, WH
Wire Module
shown in White
WH
BRZ NI
C
TaskWork Modular
12 Volt Xenon
E
10569** BRZ, NI, WH
Master Switch (optional)
n 3-1/2" L x 5" W x 1" H
n Can be installed between the wiring
module and the first fixture to control the
entire system. Or, it can be positioned
between fixtures to control those fixtures
located after it in line.
10575** BRZ, NI, WH
Plug-in Master Switch (optional)
n 3-1/2" L x 5" W x 1" H
n Allows control of cabinet lighting without
accessing house wiring
* For use only with Kichler interconnect cables as
part of TaskWork Modular systems
** For use only with Kichler interconnect cables
as part of TaskWork Modular systems. Note,
too, that switch assembly will plug directly into
the side of any TaskWork Modular fixture. This
eliminates the need to use an interconnect cable.
Check mounting location for adequate space
D
10575 BRZ, NI, WH
Plug-In Master Switch
shown in White
Fixtures can be used individually, snapped
directly together, or connected via interconnect
cables to customize the lighting application.
1522523 KL_CLSlayout.indd 22 11/30/09 8:10 AM