Installation & Assembly

Step 4: Sink installation
Step 5: Countertop Installation
Using two people, carefully place the sink in place. Verify that the sink can fit in the cabinet opening and
rest properly on the supporting system. Make a small adjustment to fit as necessary.
Verify the overall appearance and check for levelness to ensure correct drainage.
Warning! To be avoid of risk of personal injury or product damage, Handle with care. The product can
break, chip, cause injury or product damage.
After cleaning, apply a bead of silicone sealant between the top flange (or lip) of the sink and the
countertop to create a watertight seal. Clean excess silicone immediately. Verify the overall appearance and
check for levelness to ensure correct drainage. Carefully place the countertop and verify that it is level.
IMPORTANT: Apron front sinks from KIBI Sinks should only be fastened to a solid surface countertop (i.e.,
granite, Corian® or Silestone®).
Step 6: Connect water supply and drainage system per manufacturer’s instructions.
Run water to test for leakage