Installation Guide Fine Fireclay Kitchen Sink
Fireclay Farmhouse Sink Installation Instructions Thanks for choosing KIBI products. You have chosen one of our impeccable Fireclay sinks, and we are excited to get you started on installing it. & READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT & I. Important 1- Carefully read all installation and care instruction before proceeding. 2- Wa rning: Due to the dimensional variation inherent in the firecla y manufacturing process, sink cutout template are not provided.
Ill. Installation Options We recommend under-mount sink installation, Flush-mount and built up installation are not recommended. Ensure there is adequate room for the faucet and backsplash installations. Under-mount Flush-mount Built up IV. Fireclay Sink installation Step 1: Base Cabinet preparation Measure the size of the sink, Including the front apron. Cut the face of the cabinet to allow the sink to slide in.
Support Board
Step 4: Sink installation Using two people, carefully place the sink in place. Verify that the sink can fit in the cabinet opening and rest properly on the supporting system. Make a small adjustment to fit as necessary. Verify the overall appearance and check for levelness to ensure correct drainage. Warning! To be avoid of risk of personal injury or product damage, Handle with care. The product can break, chip, cause injury or product damage.
V. Products Care and Maintenance KIBI Fireclay sinks are made of clay fired at over 2,200°F and created for a lifetime of easy care. Just follow the simple guidelines listed below. Routine Care Most dirt & stains: Use soapy water or vinegar-based cleaner and a sponge and towel dry. Water marks: Wipe with damp cloth and towel dry. Difficult Stains: 50/50 water/bleach solution or non-abrasive cleaners. Follow cleaning manufacturer’s instructions, rinse thoroughly and towel dry.
VI. KIBI Limited Fireclay Sink Warranty KIBI warrants to the original purchaser of an KIBI Fireclay sink that KIBI will, at its option, replace or repair, without charge, such product if it fails due to a manufacturing defect for a period of 1 year of normal residential use. Product replacement does not include transportation cost or labor installation cost.
