User's Manual
Sportster SP-R2 User Guide
34
Antenna Aiming
When using the optional Home Docking Station or
the Boombox indoors, it is important to locate the
antenna in an acceptable location (See the individual
installation guides for more information).
1. Use the Rotary Knob to highlight “Antenna Aiming”.
Press the Rotary Knob to select.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-“ sign to the left
and a “+” sign to the right. SAT indicated satellite
signal and TER indicates terrestrial signal – if
available.
3. Adjust the antenna for maximum performance as per
the manuals.
To exit this function, press the Rotary Knob or MENU
button.
Memory Options
In this mode, the user can turn the Memory Search
Function (S-Seek) ON or OFF. In addition, all 30
Preset Memory Locations can be cleared. To
change the Memory Options, use the following
procedure while in the “Menu Options” List mode:
1. Use the Rotary Knob to highlight the “Memory
Options”. Press the Rotary Knob to select.
2. Select one of the following Memory Options:
a. Automatic Memory Search function - On or
Off: Use the Rotary Knob to select between On
and Off by highlighting the desired selection. Then
press the Rotary Knob to store.
b. Clear All Memory Locations: Press and release
the Rotary Knob; a prompt display screen appears
confirming - Clear All Memory Select “Yes” or
“No” and press the Rotary Knob.
To exit this function, press the Rotary Knob or
MENU button.