User's Manual

Sportster SP-R2 User Guide
23
instructions for their use.
Note: If the Receiver is tuned to another channel
while in the Instant Replay mode, the Instant Replay
mode is exited, all the audio stored in the Instant
Replay memory is erased, and the tuned channel
begins to play. Also note that tuning to another
channel may automatically occur if another feature
of the Receiver has been programmed to do so.
When the Instant Replay mode is active, status
information is shown at the bottom of the Receiver’s
display screen.
-0:01
Progress Bar
Play Position Indicator
Instant Replay Mode
Instant Replay Time Position
Receiver, press the Pause/Play button. This causes
the Receiver to enter the Instant Replay pause
mode, which mutes the audio from the Receiver. A
“Paused” message will be displayed for two
seconds to confirm that the Receiver has entered
the Instant Replay mode.
Artist Name
Song Title
-0:01
PAUSED
To listen to the audio that was stored, press the
Play/Pause button again and the Receiver will begin
to play back the audio stored in the Instant Replay
memory from the point where you pressed the Play/
Pause button.
As you are listening to the playback of the stored
audio, you may either fast forward or rewind through
the stored audio by pressing the fast-forward or
rewind buttons, without having to press the Play/
Pause button first. Refer to the sections describing
the Rewind and Fast-Forward buttons for specific