User's Manual

SIRPNP
2
7
Press the Encoder knob to accept the
selected time.
With Day highlighted, the unit displays the
days of the week (default: Monday). Use
the Encoder knob to select the day.
Stream: displays the list of streams. Use the
Encoder knob to select the stream to
associate with the selected time.
Program Alert On/Off: turns the Program Alert
function on and off. Your settings are:
Program Alert On or Program Alert Off.
Auto Shutdown
You can configure the shuttle to automatically shut
off after one hour. This is especially useful if the
shuttle is running on battery power, such as in your
car.
After running for 59 minutes of inactivity, the unit
displays: Cancel Auto Shutdown. If you’re near the
unit and wish it to continue, press the Encoder knob
to cancel shutdown.
Your settings are: Enabled, Disabled (default).
Rotate the Encoder knob to highlight the setting and
press the knob to select the highlighted setting.
Sleep mode
This option lets you configure the shuttle to shut
down after a number of minutes.
Sleep Off: is the factory default.
15, 30, 45 and 60 minute: intervals are your
settings.
Rotate the Encoder knob to highlight a setting and
press the knob to select it.
Clarion_SIRIUS_PnP_Shuttle_Users_Guide.book Page 27 Tuesday, February 10, 2004 10:44 AM