User's Manual

SIRPNP
2
1
The available frequencies are: From 88.1MHz to
89.9.MHz (Bandwidth: 200KHz), 91.1MHz and
91.3MHz. You may need to change the frequency
if the default frequency in your area is used by a radio station.
Switching FM On and Off
ON (the default) enables the unit to receive signals
from an FM transmitter
OFF disables FM reception
Turn this option off if you are using
the low level audio outputs in your
particular application.
Setting the frequency
When you select this option, the unit displays the
frequency settings with the highlight bar on the
currently selected frequency (default 88.9 MHz).
Note
Use the Encoder knob to select a new frequency, or
press MENU to leave the setting unchanged.
Add or Skip
With hundreds of streams available, you may wish
to limit the accessible list to only those you like.
Skipping a stream
When you select this option, the unit displays a
stream list with the current stream highlighted.
1. Rotate the Encoder knob to highlight the stream
to skip.
2. Press the Encoder knob to omit the stream.
The unit displays “SKIP” next to the stream
number. The unit will not access this stream
during regular tuning.
Clarion_SIRIUS_PnP_Shuttle_Users_Guide.book Page 21 Tuesday, February 10, 2004 10:44 AM