User's Manual

Audiovox Home Satellite Radio Tuner
SIRIUS Satellite Radio, Inc. Page 16 of 35 Confidential
The Replace screen displays “Replace” on the top line and five lines of songs on lines two
through six. The song on line two is initially highlighted. Pressing a channel Up/Down button
moves the highlight bar up/down through the matched songs. If the highlight bar reaches the
bottom line (line 6) and the channel Up button is pressed, the whole list moves upwards by
one, displaying a new entry on the bottom line and dropping the entry formerly on line 2; if the
highlight bar reaches line 2 and the channel Down button is pressed, the whole list moves
downwards by one, displaying a new entry on the line 2 and dropping the entry formerly on
the bottom line.
• By selecting Cancel, the prompt screen would disappear, and revert back to the original
screen.
Display Button – A press and release of the Display button in the default display changes the
display mode/format of the PDT information from the default size (two lines) to a single line of large
scrolling text of “Artist Name / Composer / Song Title“. When the composer field is empty then it shall
not be displayed. A press and hold of the display button in the default screen in normal tuning mode
shall enter the stream list mode. A press and hold of the display button in the default screen in
preset tuning mode shall enter the preset list mode. The stream number shall be displayed on the
left side of the screen followed by a one character space and then the long stream name. A press of
the display button in any list mode (Stream List, Category List, Preset List) will change the long
stream name display in a rotation from Stream Name Æ Artist Name / Composer (if available) →
Song Title. A press and hold of the Display button while in any List Mode will return the user to the
previously selected tuning / display mode.
Menu Button – A press and release from any tuning/display/list mode other than a setup menu will
enter the setup menu. A press and release of the menu button in any setup menu shall move back
one level in the menu structure. A press and hold in a setup menu exits to the previously selected
tuning / display mode.
6.1.1 Buttons (Remote)
Power – Shall have ISO standard power symbol printed in white on a Red button surface.
Operates the same as the Power button on the Main Device.
Category up/down – buttons shall be arrow shaped appropriately to represent up (point right)/
down (point left) direction. The word ‘CAT-‘ shall be printed in white on the down button and the
word ‘CAT+’ shall be printed in white on the up button. Operates the same as the Category
up/down buttons on the Main Device.
Stream up/down – buttons shall be arrow shaped appropriately to represent up (point up)/ down
(point down) direction. The word ‘CH-‘ shall be printed in white on the down button and the word