User's Manual

Audiovox Home Satellite Radio Tuner
SIRIUS Satellite Radio, Inc. Page 15 of 35 Confidential
A) If one or multiple matches are found, a listing screen will appear allowing the user to scroll
through the list of matched songs. Once a song is found it can be selected by pressing the
Select button , and the display will revert back to either of the selected display modes.
The S-Seek Alerts screen displays “S-Seek Alerts” on the top line and up to five lines of
songs (on lines two through six). Pressing a channel Up/Down button moves the highlight
bar up/down through the matched songs. If there are less than five matched songs, the
positions of the songs in the displayed list stay fixed and the highlight bar cycles through
them. If there are five or more matched songs, if the highlight bar reaches the bottom line
(line 6) and the channel UP button is pushed, the whole list moves upwards by one,
displaying a new entry on the bottom line and dropping the entry formerly on line 2; if the
highlight bar reaches line 2 and the channel Down button is pushed, the whole list moves
downwards by one, displaying a new entry on the line 2 and dropping the entry formerly on
the bottom line.
B) If a selection is not chosen within 10 seconds after the last action is made, the screen will
revert to the previously selected display and tuning mode.
o Please note that the currently playing selection will remain playing until a new selection
has been made.
• Replace/Cancel If the Memo Button is pressed to save a selection that is currently playing,
and all of the Memory spaces are full; in order to prevent a user from accidentally over-writing
a Memory space with new information, a prompt screen & audible beep tone will alert the
user.
• S-Seek Full – (see figure below) will flash on the display for 1 second, followed by a Pop-
Up screen providing the options Replace-Cancel. The highlight bar will default to the
Replace option.
• By selecting Replace, the Memory list will appear, and the user would use the channel
Up/Down buttons to select the Memory information that he would like to over-write with the
new Artist/Song Title. After Scrolling & Highlighting to a selected title, the user would press
the Select Button to delete the stored Artist/Song Title, and replace it with the newly selected
information.