User's Manual

Audiovox Home Satellite Radio Tuner
SIRIUS Satellite Radio, Inc. Page 13 of 35 Confidential
current selected stream at this location within the selected preset bank. The display begins flashing
the corresponding preset number at 1000mS and lights it steady at 1500mS corresponding with the
storage of the stream at that preset. An audible beep tone will be heard as confirmation that the
preset has been stored.
Channel Up/Down buttons – The channel Up/Down buttons are the primary controls for navigating
through streams and the various lists and option menus available on the unit. The function of the
Up/Down channel buttons is sequential tuning through the available program streams. Pushing the
channel Up button shall tune up one stream and pushing the channel Down button shall tune down
one stream. When in a list or menu mode pushing a channel Up/Down button increments or
decrements through the various menus and lists, respectively.
Select button -- A press of the Select button in the default display will enter Direct Tuning mode. A
press and hold of more than 1500ms will tune to the previously tuned stream.
Category Up & Down buttons – Pressing one of these keys changes the display to the Category
List Screen. The current Category and Stream are highlighted. Pressing again increments or
decrements the Category highlighted. Pressing the “up” arrow category button increments “up” one
Category from the currently selected one, pressing the “down” arrow category button decrements
down one Category from the current one.
Memo / S-Seek Button – This feature will allow the user to capture and store the current PDT
information (Artist & Song title), with a storage capacity of up to 20 listings. Through this memory
function, the receiver will also have the capability to search the current incoming Sirius signal, to
cross-reference with any stored Artist/Song title in the receiver memory.
• While the receiver is in either of the 2 standard Display Modes (i.e. not in list modes); pressing
& releasing the MEMO button once will enable the current PDT information to be stored within
the Shuttle's memory. A Pop-Up screen displaying the word “Stored” followed by “x used / y
empty” (Note: x + y = 20) will appear for 1 seconds each.
• By holding down the MEMO button for 3 seconds, the stored memory information (1 at a time)
will be displayed on the LCD screen in page format, with the ability to scroll through the stored
songs (one page per stored song) using the channel Up/Down buttons. This function will allow
the user to recall information regarding the Artist/Song Title for the users own personal review.
In the figure below, X is the displayed song’s location, Y is the total number of songs stored
(maximum value of 20). To ensure that no duplicate entries are stored in memory, the receiver
shall check the stored PID to ensure the PID attempted to be stored is not already in memory. If
it is a duplicate, shall there be a pop-up window saying something like “Already in Memory”