User's Manual

Audiovox Home Satellite Radio Tuner
SIRIUS Satellite Radio, Inc. Page 12 of 35 Confidential
default screen for the stream and tuning mode that was used last prior to power off. (Specifically,
the unit shall recall the following state information upon power up: the display format for PDT
information (two line / one line) and preset tune mode (on / off)). The display shall show the
“AUDIOVOX” logo for two seconds prior to powering off.
Band Button – There are two operation functions with this button; Press and Release as well as
Press and Hold. Pressing and releasing this button changes the Preset bank (Favorites) in a circular
list from A to B, C. The display in the lower right hand side changes to show the corresponding
Preset bank. If not in preset tune mode, the device shall not perform a stream tune when changing
preset banks. When in preset tune mode, the device switches to whichever preset was last selected
for the selected preset bank. Pressing and holding the Band button for 1000mS puts the tuning of
the device in “Preset Tune” mode. The display briefly displays the text “Preset Tune Mode” in a “pop-
up” window. If no presets have been set by the user – i.e. they are all empty – then the user shall be
blocked from entering Preset Tune mode and a pop-up with “No Presets in Memory” shall be
displayed before reverting back to normal tune mode. See Figure 3. The “A” indicator and stream
number change from positive display to negative and ”A” indicator changes to include both the bank
and the preset location. This transition indicates that the unit is now in Preset Tuning mode. In this
mode, pressing a channel Up/Down button changes the presets in ascending order (CH Up) or
descending order (CH Down) through all presets. Example: A-1 Æ A-2 Æ A-3 Æ A-4 Æ A-5 Æ A-6
Æ A-7 Æ A-8 Æ A-9 Æ B-1 Æ B-2 Æ B-3 Æ B-4, etc. Only those presets that have been set by the
user (i.e. not empty) shall be tuned within this sequence. Empty presets are skipped. The display
shall show the corresponding stream name and number for each preset and the device shall tune to
each stream with each increment or decrement of the rotary encoder. The device shall stay in
preset tune mode until the user presses and holds the “Preset” button for 1000mS again. The
displays around the “Stream Number” and the “Preset Number” will revert back to their original
display states (Stream Number and Preset information highlighted in negative.) See Figure 4.
Figure 3
Figure 4
Numbered Preset buttons (0-9) – Pressing and releasing these buttons selects the stream stored
within the selected preset bank. Pressing and holding one of these buttons for 1500mS stores the
Press and
Hold BAND
Button
Press and
Hold BAND
Button