User's Manual


1. LNB Power
 

/

%&1 
2. Satellite
Select the satelltie among the preset list using


/


buttons on the RCU.
3. LNB Type
Changes the current mode between Installer and User.
4. LNB Mode
Select the LNB Mode using


/


buttons or ener the frequecny directly with the
numaric keys on the RCU. When you select Universal, both 9750 and 1006000MHz
are supported at the same time. The 22KHz Tone setting is not necessary.
5. LNB Frequency
If the required LNB frequency is not available, then select “0” andenter the
frequency manually using the numeric keys(0~9)
6. 22KHz
When you use a dual LNB or two antennas connected to a 22KHz Tone switch box,
make 22KHz Tone switch enable or disable to select LNB or ANTENNA.

MAIN MENU OPERATION
1. Installaton /
LNB Setting