User's Manual














1. LNB Setting
Input the LNB Power on/off and select the Satellite(Antenna) for Service Search.
As you input the vallues for LNB Type, Frequency, 22KHz tone, 32Satellite
(Antenna) settings are available for use. (Pleae refer to the page ?)
2. DiSEqC Setting
If you have a DiSEqC1.2 motorised system, then user can use the DiSEqC1.2
fucntions available.
3. Auto Scan
The user can search al the transponders from the Antenna with the information
which the user adjusted in LNB Setting based on the preprogrammed channel data.
4. Manual Scan
Set the search parameters(Frequency, Symbol Rate…) to manually find the
services that you have selected in the transponder. The bar on bottom shows the
Singal Quality and Level of the input parameters.
5. Update Channle
Update the satellite or transponder information when the default parameters are
changed.
MAIN MENU OPERATION
1. Installaton
