Installation Guide

The PC drip emitters discharge the same amount of water under a pressure range of 10 to 50
PSI (.68 - 3.5 BAR), allowing for higher uniformity and longer lateral runs within the vertical
garden planting. This feature allows the number of drip emitters on a single line to be
maximized while maintaining an even ow rate from each PC drip emitter along the line.
The .3-GPH (1.1 l/h) self-ushing PC drippers with built-In check valves, included in the kit,
contain a silicon diaphragm that continuously adjusts to varying water pressures and, at
PC Drippers Features
1/4″ (6 mm) Elbow
1/4″ (6 mm) Tee
.3 GPH (1 L/H) Dripper
6″ (15 cm) Stake
1/4″ (6 mm)
Clamp
25-PSI (1.7 BAR)
Pressure
Regulator
3/4″ x 1/4″
(6 mm)
Adapter
1/4″ (4 mm)
Micro Tubing
4
EVO 100
Solar powered Hose End Timer
(not included)
Expansion of Living Wall Kit
The irrigation kit is expandable up to 65 pots using 1/4″ (6 mm) micro tubing as the main
line. If larger than 65 pots, the main line needs to be 1/2″ (16 or 17 mm).
It is simple to add extra pots. Once you have the kit installed, use the same methods to add
additional wall mounting brackets and pots, and expand the irrigation system.
1/2″ Drip Tubing
(optional)