Manual

KHANSHOTGUNS

Before starting to the assembly take the forend section of your shotgun out of the

barrel by pulling the latch downward. (See Fig 04 and Fig 05)

Be sure that you moved the top lever to the extreme right position; and release it.

The

fitting portions have to be free from dirt or burrs. You can apply a coat of preventative

lubricant to all metal surfaces. Take the barrel in your left hand and hold the receiver

with your right hand; with the appropriate angle slide the barrel

into the receiver. (See

Fig 06)

Be sure that the pins on the extractor fit into the grooves. Close the action completely.

Place the forend back into its right position by applying pressure and be sure that the

latch is completely locked. (See Fig 07)

Your shotgun is now assembled...

ASSEMBLY

Fig 04

Fig 05 Fig 07