Manual

KHANSHOTGUNS
DISASSEMBLY
Before starting to disassemble be sure that your gun is unloaded, the safety button is
on safe position and the muzzle is pointed in a safe direction. Move the latch downward
to take the forend out of the barrel. Take the top lever to the extreme right and swing the
barrel down. The extractor has to be fully forward. When pulling the barrel upward with
your left hand press the stock downward with your right hand; until you release the barrel
from the receiver continue to pull and press with your hands simultaneously. But pay
attention not to damage your shotgun, which was produced with very tight tolerances,
when you disassemble or assemble it.
HOW TO CARE FOR YOUR SHOTGUN
Your shotgun is a mechanical device and requires periodic maintenance and inspection
after usage or storage to make its service life longer. Protect your shotgun with good gun
care product. To assure trouble free performance open periodically the action and push
a patch, moistened with a good solvent through the barrel. Push a brass brush'soaked in
solvent through the entire length of the bore using long even strokes. Push clean
patches through the bore in the same manner until the last patch comes out unsoiled.
Then push a lightly oiled patch through the entire length of the bore. Brush or blow any
residue from action area. Also with a brush and solvent, clean the breech face and
extractor. Wipe dry all metal parts and oil lightly. Between hunting seasons apply a coat of
oil to the bore and metal parts and store it in a dry place away from dust. Your shotgun
should be checked periodically by a competent gunsmith to insure proper operation and
replacement of any worn or damaged parts.