Quickstart | 入门指南
Interface Diagram RGB LED Indicator USB-C RGB LED Indicator Illustrate Status Motion Bluetooth Disconnected Blue (Flashing) Bluetooth Connected Blue (Breathing) SBC Yellow (Breathing) AAC Green (Breathing) aptX / aptX LL Turquoise (Breathing) aptX HD Purple (Breathing) LDAC White (Breathing) Erase Paring Record White (Triple Flash) Color
Setup Guide 1 Power On Plug BT Magic into the USB-C (I2S) port, then turn on the Tone2/Tone2 Pro. BT Magic will automatically turn on. 2 Bluetooth Pairing (1) Set Tone2/Tone2 Pro’s input mode to ‘I2S’. (2) Look for ‘BT Magic’ in your smartphone or tablet’s Bluetooth pairing list. Tap on it to pair. Wireless Wireless BT Magic BT Magic 3 Music Playback After pairing with your device, the RGB indicator will show a blue breathing light. BT Magic is now ready for music playback.
部件说明 RGB LED Indicator USB-C RGB 指示灯说明 状态 显示状态 蓝牙未连接 蓝灯快闪 蓝牙连接成功 蓝灯呼吸 SBC 黄灯呼吸 AAC 绿灯呼吸 aptX or aptX LL 青灯呼吸 aptX HD 紫灯呼吸 LDAC 白灯呼吸 清除蓝牙配对记录 白灯闪烁3下 颜色
连接步骤 1 开机 将BT Magic插入到Tone2/Tone2 Pro的USB-C (I2S) 接口， 再将Tone2/Tone2 Pro开机后，BT Magic会自动开机。 2 连接蓝牙 (1) Tone2/Tone2 Pro输入源模式需要选择“I2S”。 (2) BT Magic连接Tone2/Tone2 Pro并开机后，在音乐播放设 备的蓝牙列表中搜索BT Magic进行配对连接。 Wireless Wireless BT Magic BT Magic 3 播放音乐 蓝牙连接好后，即可播放音乐，此时BT Magic的RGB LED会有 对应指示。 4 关机 当Tone2/Tone2 Pro关机时，BT Magic也同步会关机，关机后 BT Magic指示灯会关闭。
Specifications | 规格参数 Bluetooth Chip：Qualcomm QCC5125 Bluetooth Standard：Bluetooth 5.1 Sample Rate：Up to 24bit 96KHz LED：RGB LED Connectivity：USB-C Bluetooth Formats：SBC/AAC/aptX/aptX-LL/aptX-HD/LDAC Compatibility：Khadas Tone2/Khadas Tone2 Pro 蓝牙芯片：高通 QCC5125 蓝牙标准：蓝牙5.
What’s In The Box | 包装清单 BT Magic * 1pcs Instruction Manual * 1pcs 说明书 * 1pcs Warranty Card * 1pcs 保修卡 * 1pcs
Manufacturer: Khadas Technology Co., Ltd. Tel: +86 755 2307 6626 E-mail: support@khadas.com Address: Room 2709, Floor 27, Qiancheng Center, Haicheng Road, Xixiang Street, Bao'an District, Shenzhen 生产商：哈哒科技（深圳）有限公司 电话：+86 755 2307 6626 邮箱: support@khadas.com 地址：深圳市宝安区西乡街道海城路5号前城商业中心2709 www.khadas.
